Accessories

Este módulo Resler substitui o conhecido "Resler Interface". Estabelece a comunicação entre a aplicação I-BUS ou PC e o seu veículo. Além disso, o módulo Resler pode realizar as seguintes funções: Sequências de luz de entrada/saída de...

OBD2 Bluetooth-Adapter for app "Deep OBD" This Xtrons Bluetooth OBD adapter has been converted and tested for the app " Deep OBD " by the app developer Mr. Holeschak. This makes the adapter compatible with all BMW vehicles with OBD2...

With this adapter the Resler module / Resler USB I-BUS Interface can easily be connected to the wiring harness of an Android radio. The installation of the module / interface by soldering is not necessary. IMPORTANT: This adapter only...

This adapter cable is needed to adapt the FM/AM radio signal from the original ISO connector on the radio to the FAKRA connector for aftermarket radios. The ISO connector is usually present on radios with the old connector (BM24 with OG...

This CAN bus interface allows the communications between the I-BUS/K-CAN App and your vehicle. The CAN bus interface can be connected in addition to our Resler interface/module and the Deep OBD adapter and add further functions to these....

With these WAGO terminals, the Resler module can be easily installed in the wiring harness of an Android radio. There is no need to install the module/interface by soldering. Installation: Partially expose wiring harness from fabric tape...

This connection cable is necessary to connect the audio signal of the original 6-disc CD changer to the original DSP amplifier via COAX cable (digital). With this cable, the CD changer can be connected directly to the DSP power...

With this adapter the Resler Module / Resler USB I-BUS Interface can easily be connected to the wiring harness of an Android radio. The installation of the module / interface by soldering is not necessary. IMPORTANT: This adapter only...

With this adapter the Resler Module / Resler USB I-BUS Interface can easily be connected to the wiring harness of an Android radio. The installation of the module / interface by soldering is not necessary. IMPORTANT: This adapter only...

These holders of the new generation replace the sheet metal holders enclosed with the radio and promise an ideal seat of the radio in the mounting shaft of the BMW E39. The holders are: identical in construction for the left and right...

This extension cable is required to extend the FM/AM radio signal from the luggage compartment to the radio slot if a navigation system is installed ex works. The angled plug has the short design to ensure that the radio should fit...

Tampa protectora para a ficha USB Por exemplo, para o módulo Resler quando utilizado como dispositivo "autónomo" sem rádio Android para proteger a ficha USB de sujidade ou contacto eléctrico. Pode opcionalmente ser utilizado como...