Fittings for radio in BMW E39

22,99 € *

Цени вкл. ДДС цена за доставка

В готовност за изпращане днес.
Време за доставка приблизително 1-3 работни дни

Номер на поръчка: Halter02

These holders of the new generation replace the sheet metal holders enclosed with the radio and...още

Затвори менюто

Информация за продукта "Fittings for radio in BMW E39"

These holders of the new generation replace the sheet metal holders enclosed with the radio and promise an ideal seat of the radio in the mounting shaft of the BMW E39.

The holders are:

identical in construction for the left and right side
made of aluminium
provided with a centering countersink for better threading of the screw
have a metric M3 female thread (max. tightening torque: 0.6-1.0Nm!)

Assembly instructions (removal of the original BMW radio socket or multifunction mount) may be found here: Mounting instructions

IMPORTANT: The fittings only fit in the 5 series BMW type E39. An ideal fit may only be ensured if only angled adapters for FM antenna, GPS etc. are used at the radio! See also: Adapters and extensions

Сродни линкове "Fittings for radio in BMW E39"

The holders may be used in the following vehicles: BMW 5 Series E39 (1995-2004)... mehr

Menü schließen

The holders may be used in the following vehicles:

BMW 5 Series E39 (1995-2004)

Scope of delivery: Fittings for radio in BMW E39, 2x M3 stainless steel screw with... mehr

Menü schließen

Scope of delivery:

Fittings for radio in BMW E39, 2x M3 stainless steel screw with hexagon socket

Note: Colour deviations from the illustration are possible.

Прочети, напиши и обсъди менения...още

Затвори менюто

Оценка от клиента за "Fittings for radio in BMW E39"

От: Ulrich Schwarz На: 11.10.2024 г.

Top Produkt

1a Teile. Kann ich nur jedem empfehlen- Kein Vergleich zu den original mit dem radio gelieferten Teilen. Klare Kaufempfehlung.

От: Matze На: 31.07.2024 г.

da hat die CNC fräse perfekt gearbeitet

Passt perfekt

От: Thorsten Ohly На: 30.06.2024 г.

Tolles Produkt , superschnell versandt

Halter passen sehr gut. Sehr hochwertiges Produkt. Ist seinen Preis wert!
Der Versand war sehr schnell und gut verpackt

От: Mateo На: 21.12.2023 г.

Recommended!

I highly recommend getting these, they make it a lot easier to install and adjust the position. Definitely worth it.

От: Tolga Furun На: 7.12.2023 г.

Perfekte Passgenauigkeit

Eingebaut und den Winkel eingestellt. Passt sehr gut.

От: Nico На: 29.11.2023 г.

Passt perfekt

Hab's zusammen mit dem Xtrons IX7239BS gekauft. Die Halter passen perfekt und sind wesentlich stabiler als die beigelegten Blechhalter vom Xtrons.
Klare Kaufempfehlung.

От: douglas На: 14.10.2023 г.

Excellent!

Great quality! Highly recommended!

От: Kovács András На: 11.10.2023 г.

TOP!!!!!!!

Ich habe so einen Adapter gekauft. Man kann damit die Headunit perfekt einstellen, sie sitzt gut an Ort und Stelle. Ich empfehle es jedem!

От: ZGui На: 8.08.2023 г.

Perfect

Supplied brackets with those Android radios are terrible, I mean they're not even usable.
Get yourself a pair of these instead, these are absolutely of BMW OEM quality, all ports are matched, and they also line up my radio with the dash perfectly.
Great product!!!

От: Anonym На: 10.07.2023 г.

Alles perfekt !

Hat alles bestens geklappt - passen einwandfrei ! Danke für die schnelle Lieferung ! Bei Bedarf gern wieder !

От: Marcin На: 8.05.2023 г.

sad to say - but this a MUST HAVE for BMW

Before i bought a radio i red a lot about it. Few people adviced this brackets. I thought - what's the point paying extra 20-ish pounds for fancy brackets? Radio was expensive enough. What may be wrong with OEM brackets? Well - i was wrong. OEM brackets for Xtrons radio - are absolutely piece of crap. Radio itself is ok - bracket's aren't. Even radio mounting holes are in incorrect positions... So i ordered this. Plug an play. Everything fit as it should from day one. So - i just repeat myself - if You think about aftermarket radio - this brackets are a must have.

От: Thomsen На: 31.01.2023 г.

Perfekte Halterung für's Xtrons im E39

Die massiven Alu-Halterungen sind sicherlich die beste Lösung um das Xtrons passgenau im E39 zu montieren. Bin mit den Halterungen sehr zufrieden. Vielen Dank auch für die schnelle Beantwortung meiner Anfrage.

От: Администратор На: 1.02.2023 г.

Vielen Dank für die tolle Bewertung!

От: Darach На: 24.10.2022 г.

Good, Solid Mounting Brackets for your Upgraded Control Head

If you've had to take apart your dash to remove the OEM radio control head and mounting cage, you will understand that BMWs are built to ensure there are no poorly fastened components that will start to rattle after years of driving. This is why the cheap stamped brackets that are supplied with aftermarket radios are so inadequate: they don't fix the new component to the car very well, and they don't adjust to allow for a precise fit in the dash.

These machined aluminum fittings are a quality alternative that provide a solid mounting point for an aftermarket control head, and they can be adjusted to ensure your new control unit fits precisely and aligns perfectly in the dash. If you want your upgrade to reflect the quality that BMW designed and built into your vehicle, these brackets are the only solution.

От: Администратор На: 24.10.2022 г.

Wow, thank you so much for your extensive review :)

От: Vadims Senko На: 25.09.2022 г.

Vey High Quality

High quality, very solid compared to what comes with the radio. Recommend !

От: Jerome На: 22.08.2022 г.

Passen perfekt

От: Jürgen F. На: 2.06.2022 г.

Saubere Arbeit, passt perfekt!

Handwerklich sehr sauber gefertigte und vorallem massive Teile, nicht so windig wie das Original. Aber das Klebeband, mit dem die Teile zusammen geklebt wurden, entspricht nicht der Qualität, die sonst bei Euch an den Tag gelegt wird!

От: Dale На: 22.05.2022 г.

Perfect fit!

Very fast delivery to UK, and perfect fit for Xtrons IQ7039B in my 2002 E39 Touring. Excellent product!

От: Frank На: 17.02.2022 г.

Super Lösung und vorallem stabil und passgenau!!

Vielen Dank!! ;)

От: Andy На: 30.01.2022 г.

Top Qualität für den e39

От: Herbert На: 16.01.2022 г.

Alu Halter für Xtron Radio Navi im BMW E39

Gute Qualität , passgenau , Schrauben für Radiobefestigung mitgeliefert

От: Marco Möller На: 25.11.2021 г.

Richtig gut. Passgenau, stabil, Schrauben waren auch dabei. Top!!

Richtig gut. Passgenau, stabil, Schrauben waren dabei. Genau das was ich gesucht habe, nachdem meine Bastellösung nicht richtig fest saß. Grund dafür war, dass mein Radio gebraucht ohne Schrauben kam.

От: Zsolt K. На: 26.09.2021 г.

Excellent product, fast shipping!

Factory like fitting in my e39 limousine. Had a 4:3 BC before. Using this with Eonon GA9201A, fits perfectly, firmly standing in it's place. Needed some adjustment though. Also the original frame needs to be removed. Beware, it's not easy to remove it. But all worth the effort! Excellent product!